When the passive backup master becomes the active cluster master, it sends connections to all servers in the server load balancing list to see which servers are available. If you use server load balancing in an active/passive FireCluster configuration, real-time synchronization does not occur between the cluster members when a failover event occurs.If you apply server load balancing to a policy, you cannot set SD-WAN routing, policy-based routing, or other NAT rules in the same policy.You can configure server load balancing for any policy to which you can apply static NAT.When you configure server load balancing, it is important to know: The Firebox can balance connections among your servers with two different algorithms. You configure server load balancing as an SNAT action. The Firebox does not measure or compare the bandwidth that is used by each server. The Firebox controls the load based on the number of sessions in use on each server. With server load balancing, you can enable the Firebox to control the number of sessions initiated to as many as 10 servers for each firewall policy you configure. The server load balancing feature is designed to help you increase the scalability and performance of a high-traffic network with multiple servers. ![]() Server load balancing is not supported on Firebox T10 or Firebox T15 models.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |